The 193X527ABG01 is a device known as an interface board. This PCB or printed circuit board was made for the 193x series by General Electric.
The 193X527ABG01 circuit board is long and rectangular. Thirty-two (32) small metal parts are featured on the PCB along bottom edge which are used to attach the board to the other parts of the system. Many various capacitors which are yellow are situated all over the 193X527ABG01 in different sizes. Of the yellow capacitors, many of them are small while others are medium-sized. Every capacitor is labeled with its voltage which is printed on the outside of the component with black print. Situated near the bottom of the 193X527ABG01, there are five (5) blue components. The blue components are identified with labels such as RSTOP, SMET, IZERO, IMET, and TCA. Several round silver transistors (ten in total) are located on the 193X printed circuit board. Some of these transistors are blue on the outside. Also found throughout the 193X527ABG01 is a series of small black transistors which are half-circle shaped. Near the top edge of the circuit card, there is one (1) black potentiometer. All potentiometers feature small knobs which can be adjusted to change to adjust the device’s resistance. This is why potentiometers are also known as variable resistors. A variety of metal oxide varistors or MOVs are found on the 193X527ABG01. The MOVs are orange in color and vary in size from large to small. The many components positioned on the 193X527ABG01 are can be identified by labels in white print. The printed circuit board’s part number can also be found near the bottom left in white print.