Product Description
The 193X456AAG02 is a product called a power module board. This is a type of printed circuit board or PCB. The 193X456AAG02 is a part which was created by General Electric for the 193x series.
Four (4) slim metal plates are featured on the 193X456AAG02. These plates are held up off of the surface of the 193X456AAG02. One (1) of the plates is attached to the top of two other plates and attach them. While one (1) of these plates is arranged vertically in the center of the PCB, the other three (3) are aligned parallel to the lower edge of the 193X456AAG02. A series of six (6) wires are attached to these plates and may be used to connect them with other parts. The 193X456AAG02 contains ten (10) capacitors which are large and yellow. The part number and voltage of each capacitor is printed on the outside. Three (3) circular red components which are called metal oxide varistors or MOVs have been placed at the PCB’s top left. Positioned near these MOVs are six (6) brown resistors arranged in three pairs. The resistors have bands which are red, grey, and yellow. On the right side of the 193X456AAG02 there are two (2) other brown resistors which have bands that are orange, black, and silver. Twelve more brown resistors are aligned along the bottom of the 193X456AAG02 in six pairs. The final two (2) resistors on the board are situated on its right end. These two resistors are light blue with blue, red, and silver bands.
