The 193X244ABG03 is an electric signal detector from General Electric. The 193X244ABG03 has thirty stripped resistors that are dark brown in color. The 193X244ABG03 has two small circular transistors and five small black transistors. The 193X244ABG03 has three tiny black and orange diodes and three small grey spherical diodes. The 193X244ABG03 has two small yellow polypropylene capacitors and one large black wired ended electrolytic capacitor. The 193X244ABG03’s faceplate has one knob that reads SL Gain and another knob that reads SL. The part number (193X244ABG03) and the name of the product (signal level detector) are printed on the front of the device. The 193X244ABG03 has a small metal handle below the two knobs to put the 193X244ABG03 into place. Stripped resistors are used to restrict energy. The stripes on the resistors are part of a code. Each color corresponds with a numerical value that is used to calculate the amount of energy each resistor can restrict. Transistors are used to amplify and change electrical power and electric signals. The transistors can be identified by the three contact points they make with the circuit board. Diodes are used to control the flow of energy. Diodes are a two-terminal electronic component that conducts current primarily in one direction. Capacitors are used to store additional energy in an electrical field that they create. Each capacitor has the storage capacity printed on the side.
Looking for a quote or more information? Please call the skilled and friendly staff at AX Control for all of your automation needs.
**General Electric has provided the initial technical support. The staff at AX Control recommends referring to the original manufacturer's manual for safety procedures and instruction on how to install the part.