The 193X219ACG01 is a weak field board, produced by General Electric. The 193X219ACG01 has four small black transistors and one tiny circular silver transistor. A transistor is a semi-conductive component that is used to change or enhance any electrical power or electronic signals. The 193X219ACG01 has three small diodes. A diode is a semi-conductive device with two terminals, typically allowing the energy current to flow in one direction. The 193X219ACG01 has fourteen stripped dark brown resistors. The strips on the resistors are various colors and are linked with a code. This code gives each color a numeric value, which can then be used in an equation to determine the amount of energy each resistor can restrict. The 193X219ACG01 also has two long dark grey resistors with the restriction equation printed on top. The 193X219ACG01 has four yellow polypropylene capacitors. Polypropylene is used in capacitors because the film absorbs less moisture than a polyester film and is suitable for what s referred to as a “naked” design where it doesn’t need a type of coating or additional packaging. The 193X219ACG01 has two polyester capacitors. A capacitor is a device used to store an electrical charge in an electric field, consisting of one or more pairs of conductors separated by an insulator. The 193X219ACG01 has eight “Y” shaped metal prongs, with a small metal peg at the end securing it to the circuit board.
Please give the skilled staff at AX Control for a price quote or if you’d like additional information.