Product Description
The Fuji Electric FRN11P11S-4 is a three phase inversion drive from the Frenic 5000 P11 series. Members of the P11 series are inverters designed to operate a number of pump and fan machines across a factory or production line workplace. Motors in this drive can produce 11 horsepower. These levels can be adjusted according to the needs of an individual load. An integrated dynamic torque vector control system calculates required motor speeds needed for specific jobs.
As the device interacts with a number of variable voltages, monitoring these levels can ensure the drive is operating properly. When connected to a source, inputted voltages can range from 380V to 480V with an accompanying frequency of 50/60Hz. Outputted voltages produced by FRN11P11S-4 can measure as low as 380V to as high as 460V, with a maximum output of 480V. These are accompanied by frequencies ranging from 0.1Hz to 400Hz.
To preserve the integrity of the drive, follow all manufacturer provided installation and storage parameters. A NEMA 1 enclosure protects FRN11P11S-4, allowing it to only be installed in indoor facilities. These production lines and factories should be climate controlled, maintaining ambient temperatures no lower than -10℃, or 14℉, and no higher than 50℃, or 122℉. To review a complete installation and operation guide, refer to the P11 series manual as well as the device datasheet. Fuji Electric, the manufacturer, originally provided technical support for these drives.
Our friendly and knowledgeable sales team at AX Control is available to assist with all of your automation needs. Please contact our office by phone or email to receive current prices on all parts and repairs.
