Product Description
The Eurotherm 620L04504000010USENW0000000B0000000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
The keypad is on the front of the device for easy access by the operator or other individuals. It has a display and keys that enable control of the device. The device will show trip conditions, application program parameters, and diagnostic information.
The Eurotherm 620L04504000010USENW0000000B0000000 also features a serial port for RS232 communications. You can use this to communicate with other drives or with a laptop or other device. The RS232 port interfaces with a 4-pin RJ45 connector. Several functions are available with the serial connection. You can receive information from a laptop. For example, you can receive an updated application program parameters file. If the appropriate software tool is loaded on the laptop, the laptop can also be used to monitor and update the parameters.
To receive data from a laptop, connect the drive to the laptop using the appropriate serial connector. Make sure the serial port on the laptop is setup and install a communications package on the laptop. Select the UPD XFER (RX) command on the control panel. The message RECEIVING will display on the drive when the transmission begins. When the transmission is complete the drive automatically terminates the activity.
The serial connection can also be used to connect to a setpoint repeater unit. It can also be used to communicate with other devices for controlling and monitoring the Eurotherm 620L04504000010USENW0000000B0000000.
