The Eurotherm 620L02204000010USENW0000000B0000000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
Planning for the installation of the Eurotherm 620L02204000010USENW0000000B0000000 is critical and there are many topics to consider. One consideration is if the device will be operated locally or remotely. If local operation is chosen, the operator can optionally use the operator panel to enter commands. The operator can stop the motor, change the direction of the motor, or enter a command to run the motor at the Jog or Run speeds. They are both speeds determined by configuration settings. Other avenues for local control are also available.
If the remote control option is selected, the operator can use the control panel to configure and edit the application program. Selections are menu driven to define and update the application program. The operator can select a menu option to configure the serial ports, configure the drive parameters, or view the diagnostic parameters.
Keypad buttons enable the user to move up and down through a list of parameters, select to view the next menu, or return to the previous menu. Optionally, you can connect a laptop or other device to the 620L02204000010USENW0000000B0000000 and view or update the parameters. You can download the parameters file to the laptop and edit the file, provided the laptop has an editing program installed. Then, you can download the file back to the device. Or, download one file to multiple drives.