The Eurotherm 620L00074000010UKENW0000000B0000000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
You must plan the installation of the Eurotherm 620L00074000010UKENW0000000B0000000 carefully and consider several factors before you install the device. For example, the power supply cables, control cables, and earth cabling. You also must consider ventilation to keep the device cool during operation. Another important factor is minimizing interference which could impact operation if not planned for carefully.
However, after planning the installation, the Eurotherm 620L00074000010UKENW0000000B0000000 is easy to install. Before you start the device, to avoid injury to individuals operating the device and others in the surrounding area you must perform an inspection. Also at risk are the components, devices nearby, and building structures.
Make sure that individuals who work in the area know you are about to start the device to minimize inconvenience to them. This provides them with an opportunity the plan around the event.
First, the main power supply must be checked to ensure they are the right voltage required for the device. Consult with an electrician or engineer, if necessary. Under voltage or over voltage is harmful to components or might cause unreliable operation. Also check the auxiliary power supply for the correct voltage.
The motor has a label on it that lists the armature voltage and current rating. Obtain the information from the label and consult with an electrician or engineer to make sure the armature voltage and current rating meet the requirements of the site.