Product Description
The Eurotherm 620L-0040-400-0010-UK-ENW-0000-000-B0-000-000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
The Eurotherm 620L-0040-400-0010-UK-ENW-0000-000-B0-000-000 is easy to install and requires minimal maintenance after installation, however, before you start the device for the first time, you must follow a checklist of tasks to ensure the safety of individuals operating the device and those in the general area. You also need to consider the possibility of damage to the device and other devices in the area. Also, you might want to avoid inconveniencing other individuals in the general area in the performance of their assigned tasks.
The 3-phase power mains must be the exact voltage needed for the device. Have an electrician or engineer verify the voltage before you first start the device. Also have an electrician or engineer verify the voltage of the auxiliary power supply mains. Read the label on the motor and verify that the motor features the exact armature voltage and current rating. Have an electrician or engineer verify that information matches what is needed for the installation.
Visually inspect all power, control, motor, and earth connections. Pull on the connections to verify they are secure and look for damage to the cables that might have occurred during installation.
Carefully inspect all components and equipment for damage. Look for loose panels, scratches, dents, bent metal parts, and other signs of damage. Look also for loose screws, small wire pieces, and debris from drilling holes that might be lodged in the components.
