Product Description
The Eurotherm 620L 0040 400 0010 US ENW 0000 000 B0 000 000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
When you first receive the carton containing the Eurotherm 620L 0040 400 0010 US ENW 0000 000 B0 000 000 you must understand some critical information that determines how to proceed with the installation.
You must decide the certification requirements. For example, if you want the installation to be UL certified, you must follow guideline concerning cabling, and the requirement for an optional dynamic braking module. The optional dynamic braking module is required for UL compliance.
Also, you must understand all local and national codes and standards about the electrical power supply. This also applies to cabling requirements. The copper cabling might need to be a specific gauge based on the voltage that the cable will carry.
You must also determine if the device will be operated locally or remotely. The device can be operated locally through the control panel. It can be operated remotely through the serial port connection.
Also determine the skill and experience level of the operator. This will have a bearing on the configuration and application the device will run. You can also decide the menu level you make available on the control panel. This determines the parameters the operator can update. So only give access to the levels that are necessary.
