About the 591C/2700/6/0
591C/2700/6/0
The 591C/2700/6/0 model is a part of the wide array of Eurotherm 590 products, designed for motor control functions. The 591C/2700/6/0 unit is equipped with the standard set of hardware and features for these units, such as the Direct Current (DC) contractor, the set of Alternating Current (AC) fuse supplies, and a built in 590 LINK Drive module.
The 591C/2700/6/0 model is equipped with an array of external features, such as the standard keypad board to input commands, and the series of both analog and digital input and output ports. In total, the 591C/2700/6/0 model is outfitted with up to 21 analog and digital I/O ports. These ports are divided into 8 analog I/O, with 5 inputs, and 3 outputs, and then with the digital I/O ports, there are 10 inputs, though 2 are optional ports for both second and line encoders, and 3 outputs.
The 591C/2700/6/0 unit is built with the standard set of measurements, with dimensions of 250 mm (width), 445 mm (height), and then 180 mm (depth). The 591C/2700/6/0 model requires space for excess heat to vent properly, so as not to exceed the nominal ambient temperature of up to 40 degrees C. From both the top and bottom of the 591C/2700/6/0, 100 mm of space is needed.
The 591C/2700/6/0 is available from AX Control. Our inventory is repaired and refurbished, as well as covered by our comprehensive warranty.