About the 591C/1800/A/4
591C/1800/A/4
The Eurotherm 590 series of devices are a part of a wide array of similar units and modules. These models are designed as a series of similar products and devices, outfitted with features and hardware that match up with certain specifications.
The 591C/1800/A/4 model is a device that comes with several standard Eurotherm features. The core components that aid the model’s power processing are the 590 LINK Drive, the series of supply fusing units that operate with an alternating current intake, and then the direct current contractor module. These pieces are in every one of the Eurotherm 590 series. Internally, the 591C/1800/A/4 model includes both a 16 bit microprocessor, as well as a series of three, Phase 2, non-regenerative converter units.
The microprocessor is able to successfully run the 591C/1800/A/4 model’s control circuitry and the series of complex algorithms. The 591C/1800/A/4 utilizes the complex codes, which are unable to be properly replicated by any traditional, analog methods. The 591C/1800/A/4 relies on the control circuitry to maintain the management capabilities over the motors in question, and can alter speed and torque, depending on the selected direction.
The 591C/1800/A/4 is externally outfitted with an array of I/O ports, ranging from set ups that are both digital Input and Output ports, to analog Inputs and Outputs.
The standard Eurotherm dimensions apply to this model, giving it a width of 250 mm, a height of up to 445 mm, and a depth as far as 180 mm.
