About the 591C/1100/5/3
591C/1100/5/3
This unit is a part of the Eurotherm 590 lineup. These models are are similar variations and specifications of the Motor Control Drive. The 591C/1100/5/3 comes with a set of standard components in order to successfully operate. The 590 Link Drive and Direct Current (DC) Contactor are Eurotherm standard pieces of equipment. What also helps the module run smoothly is a the need for a series of Alternating Current (AC) fusing supplies.
The 591C/1100/5/3 is internally fitted with a standard 16 bit microprocessor module. This module aids in the motor control functions, regulating the use of the complex algorithms. These algorithms are unable to be recreated by any sort of analog methods. The 591C/1100/5/3 is also outfitted with a set of software configurable circuitry, designed with standard software blocking.
The 591C/1100/5/3 unit is equipped with a set of terminals on the exterior of its frame. These ports are both analog and digital Input and Output ports. The analog total to 8 ports overall (5 Input and 3 Output), and the digital total to 13 overall (10 Input and 3 Output). In addition to these I/O ports, a tacho input is integrated as well.
The ambient temperature for the 591C/1100/5/3 averages at around 40 degrees C. There needs to be at 100 mm of space for excess heat to vent out of the 591C/1100/5/3.
