About the 591C/0700/9/1
591C/0700/9/1
The 591C/0700/9/1 model of Motor Control Drive is a part of the wide-spanning Eurotherm 590 series of devices. These units consist of several pieces of similar hardware, such as the three core components that make up each model. These models require a 590 Link Drive, a Direct Current (DC) Contractor unit, and Alternating Current (AC) supply fusing in order to function with the nominal power intake and regulate the power supply within itself.
The 591C/0700/9/1 includes much of the similarly integrated hardware that many of the Eurotherm 590 models have, such as the Input and Output terminals included in the unit’s frame. The 591C/0700/9/1 is equipped with both analog and digital Input and Output ports. The analog ports total up to 7 I/O ports, 5 inputs and 2 outputs, and then there are 8 digital I/O ports, 5 inputs and 3 outputs. The 591C/0700/9/1 also includes an internal AVF Feedback terminal.
This model also includes other pieces of hardware, such as the integrated keypad, and the internal 16 bit microprocessor.
Spatially, the 591C/0700/9/1 model has dimensions of 250 mm by 415 mm by 180 mm (W x H x D). For venting excess heat, the 591C/0700/9/1 requires up to 100 mm of space from the top and bottom of the model. On average the nominal heat from this unit is at least 40 degrees C.
The 591C/0700/9/1 is available from AX Control, completely refurbished and optimized.
