About the 591C/0700/6/3
591C-0700-6-3
The Eurotherm 590 models are a part of a wide-spanning series of variations on a similar design. This series features units that are outfitted with three major pieces of equipment in order to successfully operate over the Eurotherm fiber optic cable network connection. These units require a 590 LINK Drive, a direct current (DC) contactor module, and an series of alternating current (AC) supply fusing.
This unit is listed here as the 591C/0700/6/3. The 591C/0700/6/3 unit is designed with the same standard Eurotherm 16 bit microprocessor. This microprocessor is capable of handling the controller programming for the unit. It is both able to run the complex control algorithms needed to keep the 591C/0700/6/3 able to manage the selected motors, as well as allow users to configure the control circuitry to their needs. The serial link communication capabilities are able to be maintained via the unit’s connection to other drives and PCs, at allow for a more advanced process system.
The 591C/0700/6/3 is outfitted with a set of external terminals on its frame, which are configured to be both analog and digital Input and Output models. The digital I/O ports total up to 8, 5 input, 3 output, and then there’s a set of 7 analog I/O ports, at 5 input, 2 output. In addition to these, a tacho input is included as well.
The 591C/0700/6/3’s dimensions measure at 250 mm (9.8 in) in width, 415 mm (16.3 in) in height, and then 180 mm (7 in) in depth.
