The Eurotherm 590DC 00 000 is a Eurotherm Drives control replacement door designed to work with the 590 DRV Link DC Drive. The 590 DRV DC drive is a DC motor controller package with a 16-bit microprocessor, four options for feedback, a field regulator, and onboard field fuses; the 590DC 00 000 is a replacement part for that system.
The 590DC 00 000 is designed to work with DRV revision eight. Your drive's catalog and revision number will verify this is the proper replacement part. Both numbers are printed on the 590 DRV serial number label. The revision number can be verified by looking at the number to the right of the decimal point; this is your revision number.
Spare parts for Eurotherm drives are organized by controller door type and power module. The Eurotherm 590DC 00 000 is designed to work with a Digital system.
The 590DC 00 000 can be installed with a 3/16th flat blade screwdriver. It is important to remember to switch the calibration cards to save the original door's calibration settings.
Installation and maintenance on the 590DC 00 000 or any other Eurotherm part should only be attempted by qualified electrical personnel. It is recommended that technical support publications from the original manufacturer (such as data sheets and manuals) are consulted for guidelines and safety procedures.
AX Control's trusted sales team is here to help you with all your automation needs. Please call or email us with any questions you have about the Eurotherm 590DC 00 000 or any other part or service.