About the 590C/0350/A/1
590C-0350-A-1
This unit, the 590C-0350-A-1 (or, alternatively ID’d as the 590C/0350/A/1 module) is a part of the Eurotherm 590 series of motor control drives. The 590C/0350/A/1 unit is designed for a enclosed system, with other associated control equipment. The 590C/0350/A/1 unit is built to accept the standard three phase Alternating Current supply voltage, between the range of 110 to 660 volts (the standard average range).
The 590C/0350/A/1 unit is one of the many Eurotherm modules designed as a device with three separate components of equipment: a 590 model DC Link Drive, a DC contactor, and alternating current supply fusing. The Eurotherm 590 series has the same features across every model. The ability to communicate via a fiber optic series of cables is one of these features embedded. There are four choices of speed configurations for DC feedback contactors that the 590C/0350/A/1 and other units are outfitted with. There is also a 16 bit microprocessor that runs the set of converter modules in the Eurotherm devices.
The 590C/0350/A/1 has a main power supply that nominally has a voltage requirement of 220 V/DC to 500 V/DC. The auxiliary supply ranges from 110 to 120 V/DC.
The 590C/0350/A/1 unit is outfitted with hardware such as a keypad, and analog feedback board, which includes tachogenerator control capabilities. The measurements of the 590C/0350/A/1 average out to 250 mm by 415 mm by 180 mm (W x H x D).
