About the 591P/0165/500/0011/UK
591P-0165-500-0011-UK
This unit belongs as a part of the Eurotherm 590 and 591 set of drives.These drives are all devices that were developed by Parker Engineering’s department of electromechanical items. These devices are solid state, thyristor type drives, outfitted to fully control industrial motors. They are separated into devices that are either regenerative or non-regenerative. The regenerative models are designed with several internal components that provide more advanced control functionality (a pair of thyristor bridges, a field bridge, transient/overload protection, supply fuses, and contactors). This unit, listed as the 591P/0165/500/0011/UK, is one of the Eurotherm 591 + regenerative drives.
The 591P/0165/500/0011/UK comes with the standard Eurotherm features and components. Externally, this unit is outfitted with a protective case, one that has earned a high protection rate. The dimensions of this model is a standard set: a width of 200 mm, a height of 434 mm, and a depth of 292 mm. This unit requires additional space to house it as well: up to 100 mm, both above and below it. This allows for excess heat to be vented properly, without causing any extensive damage to the unit.
The terminals that the 591P/0165/500/0011/UK houses on its sides includes a set of 8 analog I/O ports and 13 digital I/O ports. In addition to this, there is also the AVF internal feedback.
The power voltage the 591P/0165/500/0011/UK requires is nominally at 400 volts of direct current, and the entire range is as low as 380 to as intense as 460 volts.
