Frequently Asked Questions about ISM1100-C11
Following use of the pressurized air duster to remove dust from the sensor window of the ISM1100-C11 Cognex Vision system, what cleaning agents may be used to remove residual smudges without damage to the sensor window?
If residual smudges remain following treatment of the vision system image sensor window of the ISM1100-C11 Cognex In-Sight Micro Series Vision System then the glass window should not be touched by hand. The window can be cleaned with a cotton applicator using a form of alcohol without direct application of the alcohol (ethyl, methyl, or isopropyl).
What are the signal names of the different I/O module Cable Pin-Outs for the Cognex In-Sight Micro Series Vision Systems such as the
The I/O Module cable can be connected to the ISM1100-C11 Cognex In-Sight Micro Series Vision System when using either a CIO-MICRO or a CIO-MICRO-CC I/O module. This cable will connect to the I/O module at the DB15 connector point. This connection with the I/O module allows the user to access the trigger and the high-speed outputs of the vision system. The specific signal names form the 1-5 P1 Pins are HS OUT O, HS OUT 1, Trigger+, Trigger-, and HS Common respectively.
