Image Coming Soon
One of the more advanced in the Cognex In-Sight Micro 8000 industrial camera lineup, the IA8405 models have only a monochromatic display set. It holds 512 megabytes of non-volatile flash memory, as well as 512 megabytes of SDRAM.
Outfitted with a CMOS rolling shutter and a 1 by 2.5 inch sensor, the IS8405M-363-10 has an acquisition rating of 13 frames per second, an image resolution of 2593 x 1944 pixels. Its built in IO gives it 1 dedicated trigger in, and 2 high speed outputs. To adhere the camera to a wall or support beam, a C mount is used. 2 LED lights, configurable by the user, are attached, and this unit also comes with a barcode scanner and reader (for both 1-D and 2-D barcodes), and programmed with basic OCR and OCV capabilities and pattern recognition and edge, curve, blob, and line inspecting software.
This essential software in the IS8402M-373-50 allows for geometry, histogram design, string parsing, edge, line, curve, and blob inspection for products. Both standard and non-linear calibrations are possible via the installed caliper assessment.
While the rest of the In-Sight Micro 8000 line has dimensions of 31mm by 31.2mm by 75.1mm (or 1.22 in by 1.23 in by 2.95 in) and a weight of 132.2 grams (4.66 ounces), without the accessory mounting block, the standard dimensions of the In-Sight 8405 models are even more compact, and weigh even less, at 31 mm x 31.2 x 71.6 mm (1.22 in x 1.23 in x 2.82 in) and weighing 78 g (2.75 oz.) With the mounting block accessory, the model’s dimensions are raised to 39 mm x 31.2 mm x 71.6 (1.54 in x 1.23 in x 2.82 in) and weighing 109 g (3.84 oz).
Embedded into the base are 4 M3 threaded mounting holes. In-Sight 8405 models require the In-Sight Explorer 5.1.0 firmware, unlike the rest of the series.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2019 - AX Control Inc. - All Rights Reserved