Image Coming Soon
This ID number is designated to a single part of the the In-Sight 8000 series of Cognex industrial assembly workroom cameras. The manufacturing list of IDs includes the 828-10927-1R on the description of products, however, it does not specify what it is. The five models in the In-Sight 8000 series is the 8200 and 8400 models, and then the 8401, 8402, and the 8405.
With each of these camera models, most of the specifications vary, such as the their sensor type (either the 1/1.8 inch CMOS with a global shutter, or in the 8405 model, a 1/2.5 inch CMOS with a rolling shutter), and firmware versions (5.20 In-Sight firmware for the four, and then 5.1.1 for the 8405), and their pixel resolutions widely vary. The 8200 and 8400 resolutions have a standard 640 x 480, and the 8401 has 1280 x 1024, the 8402 has 1600 x 1200, and then the 8405 has the highest, of 2592 x 1944 pixels.
The 8200 and 8400 models have an electronic shutter speed of 14 to 520 microseconds; the 8401 has 17.4 to 750 microseconds; the 8402, 20 to 940 microseconds, and the 8405 has a shutter speed of 32 to 1000 microseconds. The frame rate also varies, with 217 frames per second for the 8200 and 8400 models, 76 fps for the 8401, 53 fps for 8402, and only 10 fps for 8405.
The similarities between these models largely lie in the built-in hardware that they have: 5 I/O ports, just one input, meant for an EtherNet trigger, and four general use outputs.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2019 - AX Control Inc. - All Rights Reserved