COVID-19 RESPONSE: Full Staff, Normal Working Hours and Emergency Shipping Available. Click here to learn more.
The In-Sight IS5411-01 Vision System has the following specifications:
Temperature in operating mode: Between 0°C and 45°C (32°F to 113°F).
Humidity of the surrounding air: 95%, non-condensing (operating and storage). This is the highest value allowed.
The IP rating is an industry standard and it is used to measure the protection given to devices by the housing. For this device, the IP is IP67 only with the lens protector.
The IEC rating is used for vibration ratings. It is a standard used through manufacturing to give a standard rating. During shipment and storage, the vibration rating: 10 G from 10-510 Hz with 150 gram lens per IEC 68-2-6.
Another IEC rating measures shock received during shipment and while being stored. For thes device, the rating is 80 G shock with 150 gram lens attached per IEC 68-2-27.
The In-Sight IS5411-01 Vision System come with a 10/100 BaseT Ethernet port with an RJ-45 connector and a RS-232C port that can be used for serial communications.
The breakout cable doesn’t come packaged with the device and is sold separately. It gives signal connections (outputs) and also power.
You can check the following items on the network to find the solution to problems. Check the adapter network settings. For example, the IP address, to make sure the settings are the same as on other devices. You can update the settings as needed. You might also attempt the replace the adapter with a new one to resolve the issue.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved