Product Description
Designed and manufactured by Cognex, the IS5410-R00 module is classified as an ID Reader Module and is part of the In-Sight 5000 Series Vision System from Cognex Vision. The IS5410-R00 module has a painted finish and is made of die-cast aluminum housing. As part of the In-Sight 5000 Series, the IS5410-R00 ID Reader Module comes with sophisticated specifications. The IS5410-R00 module’s minimum firmware requirement is In-Sight version 4.4.3. The job/program memory capability of the IS5410-R00 module is 128MB of non-volatile flash memory with unlimited storage via a remote network device, while the image processing memory capability is 256MB SDRAM. In addition, the IS5410-R00 module’s sensor type is ⅓-inch CCD, and the sensor’s properties consist of 5.92mm diagonal, 7.4 x 7.4 μm sq. pixels.
The IS5410-R00 module has a maximum resolution of 640 x 480 (in pixels squared), and its electronic shutter speed is 16μs to 1000ms. The IS5410-R00 module’s acquisition is as follows: Progressive scan, rapid reset, and full-frame integration. The bit depth of the IS5410-R00 module is 256 grey levels (8 bits per pixel), and the IS5410-R00 module gets sixty full frames per second. As for the IS5410-R00 module’s lens, it is a C-mount type lens, and its cover is made of clear plastic with an abrasion-resistant coating on the exterior side. Additionally, the IS5410-R00 module uses five status LED lights, which indicate the following: Power, Network Status, and Network Traffic, and two are configurable by the user.
For network communication, there is one ethernet port, a 10/100 BaseT, and a TCP/IP protocol. The IS5410-R00 module supports DHCP (the factory default version) and static and link-local IP address configuration.