Specifications for the In-Sight IS5410 Vision System:
During operation and also storage 95%, non-condensing is the level of humidity
The Ingress Protection (IP) rating is 67 with a lens protector installed.
Under vibrational conditions encountered while being shipped or stored, using IEC 68-2-6,
10 G from 10-500 Hz with 150 gram lens is the rating.
Under conditions of shock or turbulence encountered while being shipped or stored, using IEC 68-2-27, 80 G shock with a 150 gram lens is the rating.
256 MB is the memory provided for images the device resolves.
The image bit depth of the In-Sight IS5410 Vision System is 256 grey levels (8 bits/pixel) at 60 full frames per second.
Version 4.4.3 is the earliest firmware version supported for this device. Check to see if later versions are available. Check the firmware version contained on the device.
With the lens installed, the dimensions are 83.4mm (3.28in) x 124.2mm (4.89in) x 61.4mm (2.42in). Without the lens cover installed, the dimensions are 43.5mm (1.71in) x 124.2mm (4.85in) x 61.4mm (2.42in) including the thread guard.
Power consumption: 24VDC plus or minus 0% at 500mA. This is the highest amperage.
The In-Sight IS5410 Vision System contains 128MB non-volatile flash memory.
Through a connection on the device, you can connect to external memory. The amount of memory you can access depends on the amount of memory contained in the device.
The resolution is 640x480. The sensor type is ⅓-inch CCD. The weight is 350 g (12.3 oz.) with the lens cover installed and without the lens. The IS5410 is surrounded in a die-cast aluminum housing.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved