Product Description
You must make sure the In-Sight IS5403-01 Vision System contains at minimum, In-Sight firmware version 4.4.3. Check the version of the firmware installed on the device. Before you install the IS5403-01, consider that the device must be supplied with 24VDC ±10% power at 500mA maximum.
-
Device temperature: Make sure the device operates within the temperature range from 32°F to 113°F (0°C to 45°C).
-
Device humidity tolerances: Make sure the device is operating in 95% relative humidity non-condensing, or less.
-
With a lens cover installed on the device, the Ingress Protection rating is IP67.
-
Based on the IEC 68-2-6 standard, the vibration rating (shipping and storage) is 10 G from 10-510 Hz with 150 gram lens
-
80 G shock with 150 gram lens attached per IEC 68-2-27 is the the shock rating.
The IS5403-01 contains the following memory:
-
Non-volatile flash memory: 128MB
-
Through a network, you can access a remote storage device.
-
Memory dedicated to image processing: 256 MB.
The resolution is 1600x1200. The sensor type is 1/1.8-inch CCD. The weight is 350 g (12.3 oz.) with the lens cover installed and without the lens. The IS5403-01 features a die-cast aluminum housing.
The image bit depth of the In-Sight IS5403-01 Vision System is 256 grey levels (8 bits/pixel) at 14 full frames per second.
The In-Sight IS5403-01 Vision System features one 10/100 BaseT Ethernet port with an RJ-45 connector and one RS-232C port for serial communications. The breakout cable provides the connection for serial communications, power, trigger, and high-speed outputs.
The In-Sight IS5403-01 Vision System features Power, Network Status, and Network Traffic indicator LEDs. It also contains two user-configurable indicator LEDs.