The In-Sight IS5401-01 Vision System has the following specifications:
Temperature while operating: Between 0°C and 45°C (32°F to 113°F).
Humidity level (maximum): 95%, non-condensing (operating and storage).
The Ingress Protection (IP) rating is IP67 (with an installed lens cover).
Shipping and storage vibration rating: 10 G from 10-510 Hz with 150 gram lens per IEC 68-2-6.
Shipping and storage shock rating: 80 G shock with 150 gram lens attached per IEC 68-2-27.
The In-Sight IS5401-01 Vision System come with a 10/100 BaseT Ethernet port with an RJ-45 connector and a RS-232C port that can be used for serial communications. The breakout cable is the connection for serial communications, power, trigger, and high-speed outputs.
The In-Sight IS5401-01 Vision System features Network Status, Power, and Network Traffic status LEDs. It also contains two user-configurable indicator LEDs.
The IS5401-01 contains 128MB non-volatile flash memory and unlimited storage through a remote network device. The image processing is 256 MB. The resolution is 1024x768. The sensor is ⅓-inch CCD. The weight is 350 g (12.3 oz.) with the lens cover installed and without the lens. The IS5401-01 features a die-cast aluminum housing.
The image bit depth of the In-Sight IS5401-01 Vision System is 256 grey levels (8 bits/pixel) at 17 full frames per second.
The minimum firmware requirement for the IS5401-01 is In-Sight version 4.4.3.
Before you install the IS5401-01, keep in mind that the device must be supplied with 24VDC ±10% power at 500mA maximum.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved