Product Description
The minimum firmware requirement for the In-Sight IS5401-00 Vision System is In-Sight version 4.4.3.
Before you install the IS5401-00, consider that the device must be supplied with 24VDC ±10% power at 500mA maximum. The In-Sight IS5401-00 Vision System features Power, Network Status, and Network Traffic indicator LEDs. It also contains two user-configurable indicator LEDs.
The In-Sight IS5401-00 Vision System features one 10/100 BaseT Ethernet port with an RJ-45 connector and one RS-232C port for serial communications. The breakout cable provides the connection for serial communications, power, trigger, and high-speed outputs.
The IS5401-00 contains 128MB non-volatile flash memory and unlimited storage through a remote network device. The image processing is 256 MB. The resolution is 1024x768. The sensor is ⅓-inch CCD. The weight is 350 g (12.3 oz.) with the lens cover installed and without the lens. The IS5401-00 features a die-cast aluminum housing.
The image bit depth of the In-Sight IS5401-00 Vision System is 256 grey levels (8 bits/pixel) at 17 full frames per second.
The operating temperature of the IS5401-00 is 0°C to 45°C (32°F to 113°F). The operating humidity is 95%, non-condensing (operating and storage). The Ingress Protection rating is IP67 (with appropriate lens cover installed). The vibration rating (shipping and storage) is 10 G from 10-510 Hz with 150 gram lens per IEC 68-2-6. The shock rating (shipping and storage) is 80 G shock with 150 gram lens attached per IEC 68-2-27.
