The Cognex CCB-84901-0902-05 is a standard straight input / output module cable. Both the Insight 3400 and the Insight 5000 series of vision systems are compatible with this cable. It provides a hardwire connection from external I/O modules to the actual camera system. This unit provides a M12 to DB15 connector to interface I/O modules to the system. Using this, direct access to the system’s power, trigger, high-speed outputs, and ground signals is available. Eight inputs as well as eight outputs can be run from the vision system and external I/O module using this cable. In its entirety, this connector measures 5 meters, or 15 feet, and is a black cable with a yellow overmold.
Even though CCB-84901-0902-05 is a cable, environmental conditions must be monitored to maintain ideal device functionality. The entire system has temperature constraints that must be placed on the operating facility. The cable works best in temperatures no lower than -25℃ (-13℉) and no higher than 80℃ (176℉). Be sure to monitor ambient temperatures as they relate to the vision system itself and the external I/O module. These devices will have temperature sensitivities that may vary from those of the cable. For a complete collection of wiring and installation parameters, refer to the series manual as well as the device datasheet. Technical support for all members of the Insight family was originally provided by the manufacturer, Cognex.
AX Control’s friendly and helpful staff is available to assist you with all of your automation needs. Please contact our office by phone or email to receive current prices on all parts and repairs.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2019 - AX Control Inc. - All Rights Reserved