The Cognex In-Sight line of devices are a wide-spanning set of products, built and designed with a series of components that vary only in small specifications and details. The Cognex line of devices are all built uniformly, even down to the color scheme. The In-Sight line is designed as primarily yellow with black accents, the same colors of the Cognex Visions logo.
The In-Sight 5000 series that this unit is a part of all share the same physical measurements. This depends on whether the lens cover is attached at all. Without it installed, the In-Sight 5000 measurements are a standard 43.5 mm x 124.2 mm x 61.4 mm (1.71 in x 4.89 in x 2.42 in). With the cover attached, the dimensions slightly change to 83.4 mm X 124.2 mm x 61.4 mm (3.28 in x 4.89 in x 2.42 in).
The In-Sight 5000 models are made with a die-cast aluminum frame, which protects the delicate internal components from any possible damage. The protection rating this frame has is an IP-67 rating.
The minimum firmware requirement that the 5000 line has is the 4.4.3 version. The application memory that each model is outfitted with includes both a program memory and an image processing memory, which are respectively 128 and 256 MB.
The 800-5830-4 D, which is what this module is listed as, is a component part of the In-Sight 5000 series, and is identified by the nameplate integrated onto its frame. It is in our inventory as a piece of refurbished equipment, and available in order to repair your Cognex In-Sight 5000 industrial scanner.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2019 - AX Control Inc. - All Rights Reserved