This numeric designation ID indicates a single part used in the construction of a Cognex In-Sight 2000 model vision sensor, the IS2000C sub-group of the In-Sight 2000 family.
The IS200C group has the many deviations from the general specifications of their products, but they have the same base models, the IS2000-120C and IS2000-130C, which largely remain similar.
Both models are installed with the 5.3.0 In-Sight firmware, with 32 megabytes of non-volatile flash memory for programming and function, and 128 MB for image processing, which is converted into SDRAM, with a third of an inch sized CMOS imager, and M12 S Mount with a standard 8 millimeter lens. The same options apply to both models, with 3.6 mm, 6 mm, 12 mm, 16 mm, and 25 mm lens that also fit into the standard lens mount. The lens is capable of a maximum acquisition speed of 55 frames per second. Their electronic shutter speed is as fast as 0 to 1000 microseconds.
Both vision sensors capture image in full, 24 bit color, at 640 by 480 pixel resolution, though the IS2000-130C is capable of 4 times the image magnification, in a 800 by 600 pixel resolution. Both models come with built in Input and Output entry ports, with 1 opto-isolated acquisition trigger input, one general use input line, and four opto-isolated high speed, high quality transfer output lines.
Both the units are powered by 24 volts of direct currents and 48 watts (or 2.0 amperes)
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved