Image Coming Soon
H4-ECOM is a communications and networking module that is manufactured by Automation Direct for the DirectLogic 405 series. The 5V current required is 530 mA. This module provides an Ethernet link for the DL405 PLC system. To install this module into the DL405 base, place the bottom tab of the module into the notch at the bottom of the base and pivot the module toward the base. Secure the module with a captive screw at the top. The maximum cable length for the PLC 10/100BaseT set up is 100 meters. This module is configured to look for a Dynamic Host Configuration Protocol server at power up.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2018 - AX Control Inc. - All Rights Reserved