The F4-CP512-1 CoProcessor Module contains 3 ports. Port 1 and Port 2 use 9-pin D-sub connectors. Port 3 uses electrical connections from port 1.
The F4-CP512-1 CoProcessor Module is designed to interface with many types of devices that support a RS-232/422/485 port.
The module consumes 305 mA amperage at 5VDC. The module can be used in between 0ºC and 60ºC (32ºF–140ºF) temperature and the humidity must be 5% to 95%. Up to eight per DL405 are supported and the device can be installed in any available I/O slot.
Configuration is available from port 1 or port 2 to use all full serial ports. Also without switching cables, can program the module from port 1 or port 2.
The ABM Commander for Windows software provides the means to perform on-line full-screen program editing. The large amount of non-volatile memory provides for program storage and execution.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2018 - AX Control Inc. - All Rights Reserved