The Automation Direct Facts Engineering Koyo F4-16AD-1 is a analog current input module. Developed for the DirectLogic 405 series, this sixteen channel module is capable of interfacing with DL405 logic controllers and external I/O devices. An analog current input module, this device is capable of relaying current signals from peripheral devices. The integrated 12 bit resolution converts incoming voltage signals from a peripheral device into digitally digestible signals. The sixteen channels features on the module are single ended points, all terminating into a single common.
Monitoring current levels of the device will ensure the module is operating within its electrical limits. Two input ranges are supported by F4-16AD-1. Jumper selection allows the user to choose between 0 and 20 mA or 4 and 20 mA as the input range. Each channel must be configured for the same range. Current inputs register an absolute maximum rating of ±45 mA. A 5V base power requirement of 100 mA must be met for the device to perform properly.
All installation and storage parameters should be followed to prevent any avoidable damages. F4-16AD-1 is temperature sensitive and requires a controlled climate. When operating, ambient temperatures of the facility can fall as low as 0℃, or 32℉, and raise as high as 60℃, or 140℉. When when not in use, temperatures can affect the circuitry of the device. Storage temperatures can safely range from -20℃ to 70℃, or -4℉ to 158℉. Refer to the user manual and device datasheet for a complete guide to wiring and installing the module. The manufacturers provided original technical support for this module.
AX Control is happy to help with all of your automation needs. Please contact our office by phone or email to receive current prices on all parts and repairs.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2019 - AX Control Inc. - All Rights Reserved