COVID-19 RESPONSE: Full Staff, Normal Working Hours and Emergency Shipping Available. Click here to learn more.
8 current sinking outputs are contained in the F4-08TD1S DC Output Module.
The F4-08TD1S is an output module that supports between 24 and 150 VDC output. The module must use from 24 to 150VDC during operation. The module contains 4 (isolated) commons. The peak voltage is 200 VDC <1mS. The module contains a terminal block that you can remove as needed. The output type is NMOS FET.
The base power required for 5V is 295 mA maximum. The weight is 10 oz. (282 g). The operating temperature is 32° F to 140° F (0° C to 60° C). The operating humidity is 5% to 95% relative humidity (non-condensing).
The on or off status of the logic side indicator shows the current state of the point as it relates to the CPU. To troubleshoot a device that has failed, install a replacement. If problem still is not fixed, another device might have failed.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved