The power budget requirement for the F4-04AD, 4-Channel Analog Input Module is 85mA (supplied by base). The environmental air requirement is no corrosive gases permitted. The operating temperature 0-60°C (32-140°F). The relative humidity 5–95% (non-condensing).
The F4-04AD 4-Channel Analog Input Module is a 4-channel analog input module. The input type is single-ended or differential. The input ranges are 0–5, 1–5, 0–10, 5, 10 VDC, 0–20, and 4–20 mA. The PLC update rate is 4 channels per scan maximum. The input points requirement is 16 or 32 (X) input points 12 data bits, 4 bits optional for twos complement mode, 4 channel select bits, and 12 bits unused in 32 bit mode.
The F4-04AD can be installed in any slot in a DL230. However, one consideration is that if the module is placed so the input points do not start on a V-memory boundary, the instructions cannot access the data. The F4-04AD, 4-Channel Analog Input Module contains valuable hardware features.
The analog inputs are optically isolated from the PLC logic.
For improved usability and portability, the terminal block is easily removable to ensure the module is easily removable without disconnecting wiring.
If a DL440 or DL450 CPU is used, all four channels can be read in one scan.
The F4-04AD supports four differential voltage or current inputs.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2018 - AX Control Inc. - All Rights Reserved