D4-RS

Product Description

D4-RS is a serial remote I/O slave module developed by Automation Direct, Facts Engineering, and Koyo. A member of the DirectLogic 405 series, this module interfaces with I/O modules and remote masters of the same family. Remote slaves input data from peripheral I/O devices and send that data to remote masters installed in the logic controller’s CPU module. These remote slave modules install easily into any DL405 base. This module features a 110/220 VAC power supply requirement.

By using the remote slave and master modules, users are given a simpler I/O experience. Wiring costs are reduced as slave modules can be placed closely to their respective I/O devices. D4-RS connects to its master module using a twisted pair cable that provides an RS485 connection with a baud rate of 38.4K. Using these cables, slaves can be up to 3300 feet from its connected master. These cables can be daisy-chained to incorporate more slave modules per master. The maximum number of slave points per CPU module are dependent upon the part used. D4-430 CPUs can support 512 slave points, while higher modules like D4-450 can support up to 1536 points.

Be sure to follow all provided installation and storage parameters to prevent any unwanted damages to D4-RS. Though it can be located away from the controlling PLC, the slave module requires a climate controlled environment. While operating, temperatures can safely fall as low as 32℉, or 0℃, and can raise as high as 140℉, or 60℃. Storage temperatures can also affect the device when it is not in use. These temperatures can range from -4℉ to 158℉, or -20℃ to 70℃. All installation and wiring information can be found in the series manual as well as the device datasheet. Automation Direct and Koyo provided original technical support for this module.

AX Control is available to assist with all of your automation needs. Please contact our office by phone or email to receive current prices on all parts and repairs.