COVID-19 RESPONSE: Full Staff, Normal Working Hours and Emergency Shipping Available. Click here to learn more.
The base power required for the D4-16NE3 AC/DC Input Module at 5V is 150 mA maximum. The weight is 8.8 oz. (250 g). The operating temperature is 32° F to 140° F (0° C to 60° C). The operating humidity is 5% to 95% relative humidity (non-condensing).
Each point on the module has a logic side indicator.The on or off status of the indicator reflects the status of the point with respect to the CPU. If the indicator LED is on, the input circuitry is operating properly. Verify the LED goes off when the input signal is removed. If you suspect that the module has failed, replace it, if you have a spare. This is an effective method of troubleshooting. If you suspect another device to have caused the failure in the module, that device might cause the same failure in the replacement module as well.
The D4-16NE3 AC/DC Input Module contains 16 inputs. The input voltage is 3.8mA at 12V and 8.3mA at 24V. The module contains 2 commons (isolated) and 8 points per common. The peak voltage is 37.5VAC/VDC. The module contains a removable terminal block (D4-16IOCON).
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved