Automation Direct's 16 Point, 2 Common DC Powered Input Module is a commissioned product manufactured by Koyo and PLC Direct. The 16 points on the module are all sink/source inputs. For every 8 point on the module there is an isolated commons. The device weighs 6 ounces. Thanks to the external input voltage, the module can create and run on AC power. There is a removable terminal that gives the module the ability to be used remotely. There is a logic side status indicator that allows for the user to be notified of issues within the system.
The input voltage range of the 16 Point, 2 Common DC Powered Input Module is between 14-30 VDC. The peak input voltage of the device is 30 VDC. Both the off/on and on/off response of the DC power spans from 5 to 25 milliseconds. The AC Frequency of the device volleys between 47 and 63 hertz. The input impudence is 1.8 KΩ. The input current maxes out at 16 mA. The minimum on current is 7 mA, while the maximum off current is 2 mA.
For the external input of the 16 Point, 2 Common DC Powered Input Module, the input voltage range is from 14 to 30 VAC. The peak input voltage is 30 VAC. The off/on and on/off response are both between 5 and 30 milliseconds.
The searchable product number of the 16 Point, 2 Common DC Powered Input Module is D3-16NE3. The product number of the instruction booklet is the D3-USER-M manual. Call us now to get pricing quotes and information about our warranties.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2018 - AX Control Inc. - All Rights Reserved