The D3-16NA is an AC Input module that belongs to the DirectLogic 305 series by Automation Direct. This module features 16 inputs with 2 isolated commons per module. It has an input voltage range of 80 to 132 Volts AC and requires an external input voltage supply. It has a rated peak voltage of 132 Volts ac and an AC frequency of 50 to 60 Hertz. The On Voltage level is greater than 80 Volts AC and the Off Voltage level is less than 15 Volts AC. The D3-16NA AC Input module has an input impedance of 8 K ohm with an input current of either 16mA at 60 Hz or 24mA at 60 HZ. With a minimum On current of 8mA and a maximum Off current of 1.5mA, the base power required for this input module is 9V (6.5mA maximum/on pt 100 mA maximum). Both the off to on and on to off response times range from 5 to 50 or 60ms. D3-16NA is a removable terminal type with status indicators located on the logic side of the module. This module weighs 6.4 ounces or 189 grams. Please note: if the D3-16NA requires more power than the maximum power supply can provide to your system, consider relocating some of the modules to an expansion base. You must ensure you do not exceed the amount of power available to you in the system. Neglecting this step may result in harm to either the equipment or the operators. When connecting your D3-16NA I/O module to the system, us the cable ZL=D3CBL18#.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved