The D3-08TA-1 I/O Base supports 8 points. The D3-08TA-1 requires 110-220V AC power. The D3-08TA-1 is an output module. It supports 1 amp per point and it has 2 commons. It has a removable terminal and 2 fuses that cannot be replaced.
The D3-08TA-1 I/O Base contains 8 slots. The D3-08TA-1 can support one CPU base and one expansion base. 5-slot or 8-slot expansion bases only are supported.
The inrush current is 10 amps for 16 ms and 5 amps for 100 ms. These are the maximum supported ratings. The module is designed with 2 isolated commons. 80-265 VAC is the voltage required during operation. The output type is Triac. The peak voltage is 265 VAC.
The AC frequency is 47-63 Hz. The maximum leakage current is 1.2 mA at 220VAC and 0.52 mA at 110VAC. The required base power is 9V 20 mA per point (160 mA maximum). The fuses are 5 amp and the fuses are not replaceable. Two fuses are contained in the device. The weight is 7.4 z (210 g).
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2018 - AX Control Inc. - All Rights Reserved