COVID-19 RESPONSE: Full Staff, Normal Working Hours and Emergency Shipping Available. Click here to learn more.
Use the D2-HPP Handheld Programmer for on-site setup, maintenance, and PLC program revisions. The D2-HPP Handheld Programmer can be used to program the DL105, DL205, and DL240 PLC devices. The handheld programmer uses instruction mnemonics for programing, making the hand held programmer suited for developing short programs and minor program updates.
The D2-HPP enables the operator to change many PLC system settings. These settings include I/O configuration, memory settings, clock, and calendar setup. The D2-HPP supports the DL130, DL230, and DL240 PLC devices. The D2-HPP contains a two line LCD display. Each line displays a maximum of 16 characters.
Use the handheld programmer to monitor the memory status of the PLC. The handheld programmer enables you to monitor memory locations such as; V-memory, I/O information, timer/counter values, and system data.
Use the D2-HPP for troubleshooting purposes. The D2-HPP is enabled to troubleshoot hardware and software conditions. Program diagnostics, I/O diagnostics, and program logic diagnostics are some of the available diagnostic tools.
A 6.6 ft (2m) Programmer cable is used to connect the D2-HPP to the PLC. The power requirement is 200 mA and the power is obtained through the Programmer cable connected to the PLC.
The operating temperature is 32 to 122° F (0-50° C). The storage temperature is -4 to 158 F (-20 to 70° C). The dimensions are 5.7” L x 4.6” H x 1.2” D (145mm W x 118mm H x 30mm D). The weight is 1.7 oz. (48.2 g.).
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved