COVID-19 RESPONSE: Full Staff, Normal Working Hours and Emergency Shipping Available. Click here to learn more.
The F2-08TA AC Output Module can be installed in any slot of a DL205 PLC system. The F2-08TA can be placed in CPU slots, local expansion base slots, or a remote I/O base slot.
The outputs per module of the F2-08TA is 8. The commons per module is 2 (Isolated) and the output type is solid-state relay (SSR). The operating voltage for the F2-08TA is 24–140 VAC. The peak voltage is 140 VAC and the ON Voltage Drop is 1.6 V(rms) at 1.5 A. The AC frequency is 47 to 63 Hz. Also, the minimum load current for the F2-08TA is 50 mA.
The maximum load current is 1.5 A / pt at 30ºC, 1.0 A / pt at 60ºC, 4.0 A / common; 8.0 A / module at @ 60ºC. The maximum leakage current for the F2-08TA AC Output Module is 0.7 mA (rms). The peak one cycle surge current is 15A and the base power requirement for the F2-08TA AC Output Module is 5VDC 250mA.
The weight of the F2-08TA AC Output Module is 3.5 oz and no fuses are required. 8 output I/O points are required for each F2-08TA AC Output Module and the power consumption is 250 mA at 5V.
A leading supplier of obsolete industrial automation equipment, AX Control is located in the Research Triangle area of North Carolina.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved