8440-1842

Product Description

Part number 8440-1842 is from Woodward Inc’s easYgen-3000 series and this specific model is also labeled as an easYgen-3200-1-P2 model. The easYgen-3200-1-P2 model is equipped with an LCD screen that allows the user to have direct access to the status information and potential configurations of the controller. When you are using wiring to connect your controller there are several different AWG wires that you can use and different size ranges as well, please make sure that you are using the correct AWG wire to ensure that your controller runs as it should and does not malfunction during operation of the controller and generator/engine. 

Your 8440-1842 controller comes with a menagerie of different functions, one of the functions of your controller is the slave or master capability on your device. Your controller is also equipped with vector groups that can be adjusted to optimize synchronization. Model 8440-1842 is equipped with a self-check test, the self-check test typically keeps the supply voltage and processor function operation under control to ensure that your controls perform at their peak. 

The power supply of the control is 12/24 Vdc, when you are connecting the power supply there are three terminals used, terminal sixty-one connects the protective earth, which should only be used on plastic units. Terminal sixty-three is where the main power supply is connected, and terminal sixty-four should also be connected but shouldn’t generally receive a power supply. 

If you would like to purchase or inquire about repair costs on this model you can contact AX Control by phone number at (919)372-8413 or by email at sales@axcontrol.com.