Product Description

AX Control INC buys, sells, repairs, and refurbishes the EasyGen 2000 series made by Woodward INC. The 8440-1884 control is one of the many controls that we have available in our new surplus or secondhand inventory. This specific control can be used only with diesel or gasoline engines. 

The control can be used with both main voltages and busbar voltages but the control can only measure specifically one of the two voltages at a time. In reference to the busbar windings, the parameter setting of one-phase two-wire (1Ph 2W) is known as the most neutral setting. When it comes to the terminal assignment and which terminals should be wired the phases used within this control are slightly different from the other phases. Terminals twenty-three, twenty-five, twenty-seven, and twenty-nine are in the following phases, L1 and then phase N, the L1 phase is assigned to terminal twenty-three and the three N phases go with terminals twenty-five, twenty-seven, and twenty-nine. 

It is vital to note that this series of controls does not come with a magnetic pickup unit (MPU), if needing to use a magnetic pickup unit it can be connected through terminals fifty-seven and fifty-sex. The shielded cable that you are using for the connection of the MPU must be done so through a single-point grounded terminal near the control. 

If you have a part and are willing to sell the part you can contact our sales team by phone at (919) 372-8413 or by email at sales@axcontrol.com.