6MDDN-4P0101

    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures 4.90 (10) Click a star to rate this product
    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 4.90 (10)
  • Click a star to rate this product


MD60 2HP 6MD40002 AC Drive. Buy, Sell, Repair

New Surplus Factory Package
SKU: 21MD1
2 Year Warranty:
New Surplus AX Control Package
SKU: 21MD2
2 Year Warranty:
Reconditioned
SKU: 21MD3
2 Year Warranty:
Repair
$315
SKU: 21MD4
2 Year Warranty:

* Learn More About Product Conditions
* Posted pricing available for website purchases only.

Product Conditions

New Surplus Factory Package: A completely unused product that is in the original factory package. The package may have been opened for the purpose of pictures, but the product has never been used or installed.

New Surplus AX Control Package: A completely unused product that has been removed from the original factory package. Often due to shelf wear or previous shipping, the factory package is not adequate and must be replaced with an ideal AX Control product package.

Reconditioned: All products that qualify as reconditioned have completed AX Control's thorough and detailed QA process and meet the requirements of excellent working condition and excellent cosmetic condition.

About the 6MDDN-4P0101

6MDDN-4P0101 is a Reliance Electric 460V, 50/60 Hz, 3-phase drive that is part of the MD60 drive series. This drive has 1.5 kW, a horsepower rating of 2.0, and an output current of 4.0 A. The frame size is A. There are a number of parameters on the MD60 drive. Parameter A051 and A052 are the Digital In1 and In2 Select. The default for both is 4 (Preset Frequencies) and the range for both is 0 (Not Used), 1 (Accel 1 & Decel 2), 2 (Jog), 3 (Auxiliary Fault), 4 (Preset Frequencies), 5 (Local), 6 (RS485 Port), 7 (Clear Fault), 8 (Ramp Stop, Clear Fault), 9 (Coast Stop, Clear Fault), 10 (DCIj Stop, Clear Fault), 11 (Jog Forward), 12 (Jog Reverse), 13 (10V In Cntrl), 14 (20 mA In Ctrl), and 26 (Anlg Invert). Parameter A055 is the Relay Output Select. The default is 0 (Ready; Not Faulted) and the range is 0 (Ready), 1 (At Frequency), 2 (Motor Running), 3 (Reverse), 4 (Motor Overload), 5 (Ramp Regulated), 6 (Above Frequency), 7 (Above Current), 8 (Above DC Bus Volts), 9 (Retries Exhausted), 10 (Above Anlg V), 20 (Param Control), 21 (Non Rec Fault). Parameter A056 is the Relay Output Level. The default is 0.0 and the range is 0.0 to 9999. Parameter A067 is the Acceleration Time 2. The default is 10.0 seconds and the range is 0.0 to 600.0 seconds. Parameter A068 is the Deceleration Time 2. The default is 10.0 seconds and the range is 0.0 to 600.0 seconds.

6MDDN-4P0101 Manuals, White Papers, Data Sheets, and Troubleshooting

6MDDN-4P0101 Technical Specifications

Manufacturer Reliance Electric
Series MD60
Part Number 6MDDN-4P0101
HP 2 HP
Input Voltage 380-480 VAC
Enclosure NEMA 1 or Chassis
Hz 48-63Hz
kW 1.5kW
Filter/No Filter Not Filtered
Labeling UL Listed, IEC Certified

Frequently Asked Questions about 6MDDN-4P0101

How should I protect my 6MDDN-4P0101 from debris?
With MD60 drives, a plastic top panel is included. To protect your 6MDDN-4P0101 from debris and to prevent debris from falling through the vents of the 6MDDN-4P0101, install the panel during installation. 
What frame size does the MD60 6MDDN-4P0101 have?
The 6MDDN-4P0101 has an A frame size.
What is the output current for a MD60 6MDDN-4P0101?
Because of its 1.5kW and 2 HP, the output current is 4.0A for a MD60 6MDDN-4P0101 reliance drive.
Where can I find a detailed list of parameters for my 6MDDN-4P0101?
The MD60 AC Drive User Manual includes descriptions of all parameter numbers and parameter values. We can send you a link to the manual where you can identify each parameter as well as find out more about your MD60 6MDDN-4P0101 as the manual describes many parts of the drive. 

6MDDN-4P0101 Technical Specifications

Manufacturer Reliance Electric
Series MD60
Part Number 6MDDN-4P0101
HP 2 HP
Input Voltage 380-480 VAC
Enclosure NEMA 1 or Chassis
Hz 48-63Hz
kW 1.5kW
Filter/No Filter Not Filtered
Labeling UL Listed, IEC Certified

About the 6MDDN-4P0101

6MDDN-4P0101 is a Reliance Electric 460V, 50/60 Hz, 3-phase drive that is part of the MD60 drive series. This drive has 1.5 kW, a horsepower rating of 2.0, and an output current of 4.0 A. The frame size is A. There are a number of parameters on the MD60 drive. Parameter A051 and A052 are the Digital In1 and In2 Select. The default for both is 4 (Preset Frequencies) and the range for both is 0 (Not Used), 1 (Accel 1 & Decel 2), 2 (Jog), 3 (Auxiliary Fault), 4 (Preset Frequencies), 5 (Local), 6 (RS485 Port), 7 (Clear Fault), 8 (Ramp Stop, Clear Fault), 9 (Coast Stop, Clear Fault), 10 (DCIj Stop, Clear Fault), 11 (Jog Forward), 12 (Jog Reverse), 13 (10V In Cntrl), 14 (20 mA In Ctrl), and 26 (Anlg Invert). Parameter A055 is the Relay Output Select. The default is 0 (Ready; Not Faulted) and the range is 0 (Ready), 1 (At Frequency), 2 (Motor Running), 3 (Reverse), 4 (Motor Overload), 5 (Ramp Regulated), 6 (Above Frequency), 7 (Above Current), 8 (Above DC Bus Volts), 9 (Retries Exhausted), 10 (Above Anlg V), 20 (Param Control), 21 (Non Rec Fault). Parameter A056 is the Relay Output Level. The default is 0.0 and the range is 0.0 to 9999. Parameter A067 is the Acceleration Time 2. The default is 10.0 seconds and the range is 0.0 to 600.0 seconds. Parameter A068 is the Deceleration Time 2. The default is 10.0 seconds and the range is 0.0 to 600.0 seconds.

6MDDN-4P0101 Manuals, White Papers, Data Sheets, and Troubleshooting

Frequently Asked Questions about 6MDDN-4P0101

How should I protect my 6MDDN-4P0101 from debris?
With MD60 drives, a plastic top panel is included. To protect your 6MDDN-4P0101 from debris and to prevent debris from falling through the vents of the 6MDDN-4P0101, install the panel during installation. 
What frame size does the MD60 6MDDN-4P0101 have?
The 6MDDN-4P0101 has an A frame size.
What is the output current for a MD60 6MDDN-4P0101?
Because of its 1.5kW and 2 HP, the output current is 4.0A for a MD60 6MDDN-4P0101 reliance drive.
Where can I find a detailed list of parameters for my 6MDDN-4P0101?
The MD60 AC Drive User Manual includes descriptions of all parameter numbers and parameter values. We can send you a link to the manual where you can identify each parameter as well as find out more about your MD60 6MDDN-4P0101 as the manual describes many parts of the drive.