Product Description
6MDBN-012101 is a 230 V, 50/60 Hz, 3-phase MD60 Drive that is manufactured by Reliance Electric. The output current is 12.0 A, the horsepower is 3.0, and the output power is 2.2 kW. There is no filter in this drive. The frame size is B. The possible causes when the drive does not start from Terminal Block Start or Run Inputs include the following: a faulted drive, incorrect programming, incorrect input wiring. The possible causes when the drive does not start from Integral keypad include: a non-enabled integral keypad, a not-present I/O terminal 01 “Stop”. The possible causes when the drive does not respond to changes in Speed Command include: the source of the command is not producing a value, an incorrect reference source is being selected via remote device or digital inputs.
The possible causes when the motor and/or the drive will not accelerate to commanded speed include: an excessive acceleration time, excess load or short acceleration times force the drive into current limit, slowing, or stopping acceleration, there is an unexpected speed command source or value, the drive output cannot exceed limiting values due to the programming. The possible cause when the motor operation is unstable is that the motor data was incorrectly entered. The possible causes when the drive will not reverse the motor direction include: the reverse is disabled, the motor wiring is improperly phased, the digital input is incorrectly wired, and the digital input is not selected for reversing control.
6MD20003
The 6MD20003 module was produced by Reliance Electric for the MD-60 series as an AC drive. 6MD20003 is the catalog number for the AC drive model number 6MDBN-012101. The majority of the time, you will find the 6MD20003 AC drive inside of our stock at AX Control due to our efforts to supply it for the convenience of our customers.
The 6MD20003 AC drive is a 3 phase drive with a motor rating of 2.2 kW and 3.0 HP. The input for the 6MD20003 AC drive is rated as being of 200 to 240 V and 48 to 63 Hz, with an AC voltage range of 180 to 264 V and an amperage rating of 15.5 A. The output, on the other hand, is rated as being 0 to 240 Hz, with an AC voltage range of 0 to 230 V, a continuous amperage rating of 12.0 A and a 60 sec ovid amperage rating of 18.0 A.
The 6MD20003 AC drive’s faceplate has a small LCD display at the top, which can indicate different kinds of information to the operator. Below the display, there is a small dial and numerous buttons that the operator will use to control the LCD display and the functions of the drive.
On one side of the 6MD20003 AC drive, there is a label that outlines the different codes that can appear on the LCD display. On the left side of this label, there is a list of all of the drive’s fault codes. On the right side of this label, there is a list of all of the drive’s common parameters.
Request a Quote
