6MDAN-2P3111

About the 6MDAN-2P3111

6MDAN-2P3111 is a 230 V, 50/60 Hz, 1-phase MD60 Drive that is manufactured by Reliance Electric. The output current is 2.3 A, the horsepower is 0.5 HP, and the output power is 0.37 kW. There is an integral EMC filter. The frame size is A. There are seven LEDs on the drive. When the RUN LED is on (steady red), the drive is running, When the FWD/REV LED is flashing red, the motor has been commanded to change direction, and when its is steady red, it indicates the commanded motor direction.

When the VOLTS/AMPS/HERTZ is steady red, the parameter value units are being indicated. When the PROGRAM LED is steady read, the drive is in program mode and the parameter value can be changed. When the FAULT LED is flashing red, the drive has a fault. When the Pot Status LED is steady green, the potentiometer on the integral keypad is active. When the Start Key Status is steady gream, the Start key on the integral keypad is active, and the Reverse key is also active unless disabled by A095 (Reverse Disable). Some other critical keys in the 6MDAN-2P3111's interface are its:

• Program key on the keypad that allows the user to enter/exit program mode, scroll through parameter groups, back up on step in the programming menu, or cancel a change to a parameter value

• Up and Down arrow keys that allow the user to scroll through P and A parameters, increase and decrease the value of a flashing digit, and increase or decrease the internal frequency parameter if in Display Mode

• Enter key which allows the user to display a P or A parameter, scroll through display parameters, or save a change to a parameter value

• Potentiometer that allows the user to control the drive speed

• Start key that allows the user to start the drive

• Reverse key that allows the user to reverse the direction of the motor

• Stop key that allows the user to stop the drive if the drive is running or clear a fault if the drive is stopped