6MDAN-012111

Product Description

6MDAN-012111 is a 230V, 50/60 Hz, 1-phase MD60 Drive that is manufactured by Reliance Electric. The output current is 12.0 A and the horsepower is 3 HP. There is no filter in this drive. There are a number of drive parameters that all have preset default values. The Digital In1 and In2 selects default at 4. The default Relay Output Level is 0.0. The default acceleration time is 10.0 seconds, and the default deceleration time is also 10.0 seconds. The default internal frequency is 0.0 Hz, and all preset frequency values are default at 0.0 Hz. The default jog frequency value is 10.0 Hz. The jog acceleration and deceleration defaults are 10.0 seconds. The DC brake time default is 0.0 seconds. The DC brake level default is amps x 0.5. The default DB register select is 0 (disabled). The default S curve is 0% (disabled). The default start boost is 8=5.0. The default maximum voltage is the rated volts. The default current limit is amps x 1.8. The motor DL select is 0 (no derate). The default PWM frequency is 4.0 kHz. The default auto restart tries is 0. The default restart delay is 1.0 seconds. 0 is the default for Start at Power Up, Reverse Disable, and Flying Start Enable. The default compensation is 1 (electrical). The default SW Current Trip is 0.0 (disabled). The default process factor is 30.0. The default fault clear is 0 (Ready). The default program lock setting is 0 (unlocked). The default testpoint select is 0000. The default Comm Data Rate is 4=19.2k. The default Comm Node Address is 1. The default Comm Loss Action is 0=Fault. The default Comm Loss Time is 5.0. The Comm Format is 0=RTU 8-N-1. No password is required to access these parameters.