Frequently Asked Questions about 760-P1-G1-S1-LO-A20-R
What does the label state about the GE Feeder Management Relay and the part number for 760-P1-G1-S1-LO-A20-R?
The label for the relay specifies order codes and model numbers. For the GE Feeder Management Relay 760-P1-G1-S1-LO-A20-R label, can be found on the left side of the relay and the installed power supply's operation range will be on the label.
Should the GE Feeder Management Relay for 760-P1-G1-S1-LO-A20-R be connected to the ground bus directly using the shortest path?
Yes, use the shortest practical path to the relay and connect the ground bus. A braided, copper, bonding cable that is shielding should be used to connect the ground bus. A belden catalog 8660 will work properly, as a minimum 96 strands of 34 AWG will work.
How should the GE Feeder Management Relay supervision circuit be wired for the 760-P1-G1-S1-LO-A20-R?
In the case for the GE Feeder Management Relay, the relays supervision circuit should be wired parallel to the trip contact. Just like the supervision of a close coil has the supervision circuit wired parellel with the close contact.