About the IS210DSVOH1B
The IS210DSVOH1B PCB was designed for the Mark VIe Wind Turbine Control Series, and manufactured by industry giant General Electric' shell company GE Energy. Within the Mark VIe Speedtronic Series, the IS210DSVOH1B printed circuit board can be more specifically defined as a Compact Servo Terminal Module. This DSVO-abbreviated Terminal Module is actually a revised version of the parent IS210DSVOH model; with a singular functional revision rated at a "B" grade. Beyond this product's specialized B-rated functional revision, the IS210DSVOH1B Terminal Board also seems to posses a special assembly type, as indicated by the "IS210" series tag in its individualized product number.
Hardware Tips and Specifications
While a number of general hardware modifications are mentionable right off the bat for this IS210DSVOH1B printed circuit board, a number of important, even more specific components seem to contribute well to its status and functionality as a Compact Servo Terminal Module:
- One such component exists in the IS210DSVOH1B board's Servo valve accommodations. This IS210DSVOH1B model features accomodation for an impressive range of Servo valves; including 75, 40, 22, 62, 89, 125 and 1k ohms-supporting servo valves.
- Beyond the servo valves that may somewhat obviously take up board space on a Compact Servo Terminal Module, this printed circuit board seems to additionally feature two LVDT excitation outputs, with voltage ratings of 120 mA a piece.
- A third mentionable hardware component seen affixed to the base board of the IS210DSVOH1B can be described in its series of excitation for pulse rate probes, of which it has two. Each of these probes carries voltage ratings of 24 V dc and 100 ma a piece. It is important not to confuse the number of probes present on this IS210DSVOH1B model with the number present in the assembly of the rival IS210DSVOH2A sister product; the IS210DSVOH2B Terminal Board does not feature a single probe in its greater assembly.
The IS210DSVOH1B features a number of hardware components critically important to be aware of during installation or replacement of this terminal board. To start off, the IS210DSVOH1B is designed to slide into a plastic holder, which itself is designed to mount on the DIN-rail mounting system.
The servo inputs and outputs present on the base board of the DSVO-abbreviated PCB are directly wired to the correct corresponding Euro-Block terminal blocks, which for the IS210DSVOH1B model, feature an extended 42-terminal allotment, ideal for number 18 AWG shielded twisted pair wiring.
All of the hardware components listed above should be satisfactorily protected behind a solid base layer of conformal-style PCB coating. Conformal coating, while very much thinner than the popular normal PCB coating alternative, is completely layerable over every surface of every IS210DSVOH1B printed circuit board component; as it was applied through chemical treatment.
The conformal coating style typical of this IS210DSVOH1B printed circuit board was revealed through a careful breakdown of the IS210DSVOH1B product number, which yielded a slew of pertinent information for the DSVO Terminal Board, including its original manufacturer location, its special assembly type, and other relevant morsels. A full, diagrammed part number breakdown for the IS210DSVOH1B is available above, embedded in our manuals tab.
Please remember before making a purchase of this product that it is a revised version of the original factory-verified Terminal Board, and that some of the information posited in the previously-correct manual material for this DSVO printed circuit board may be outdated or inapplicable. AX Control keeps this product on hand for both repair and replacement, with a standard one to two week wait time on repairs.